|
6. MANUFACTURING - Sewing |
|||||||||||||||||||||||
|
Lockstitch Single Needle |
|
Overlock 3 Thread |
|
Twin Ndl Seam cover Flat Bed |
|
Zig Zag |
|
||||||||||||||||
|
Lockstitch Twin Needle |
|
Overlock 4 Thread |
|
Twin Ndl Seam Cover - Cylinder Arm |
|
Blind Hem |
|
||||||||||||||||
|
Bar Tack |
|
Overlock 5 Thread |
|
3 Needle - Flat Lock |
|
Picot Edge |
|
||||||||||||||||
|
Button Sew Lockstitch |
|
Button Sew Chainstitch |
|
Bonadex |
|
|
|
||||||||||||||||
|
Button Hole Lockstitch |
|
Button Hole Key Hole |
|
Lap Seam - Feed Off The Arm |
|
|
|
||||||||||||||||
|
OTHER FEATURES (Tick if available) |
MAINTENANCE / SERVICE |
||||||||||||||||||||||||
|
Auto Backlatch |
|
In-house mechanics? |
|
||||||||||||||||||||||
|
Underbed Trimmers |
|
How often are m/cs Serviced by mechanics? |
|
||||||||||||||||||||||
|
Folders / Special Attachments |
|
How often are machines Cleaned? By whom? |
|
||||||||||||||||||||||
|
Jigs |
|
Where is mechanics room located? |
|
||||||||||||||||||||||
|
Stitch Program Controls |
|
Condition of Machines |
|||||||||||||||||||||||
|
Poor |
Satisfactory |
Very Good |
|||||||||||||||||||||||
|
Specialist machines e.g. Automatic welt pocket m/c, etc. |
|||||||||||||||||||||||||
|
6.2. How are styling details marked ? Eg. Pockets, badges? |
|||||||||||||||||||||||||
|
6.3. Type of Production System? E.g. Progressive Bundle, Modular. |
No of Production lines? |
||||||||||||||||||||||||
|
6.4 Work transport method? |
Levels of WIP? |
Low |
OK |
High |
|||||||||||||||||||||
|
Work clearly identifiable? |
Yes |
No |
|||||||||||||||||||||||
|
6.5. Workmanship: |
Basic |
Average |
Complicated |
||||||||||||||||||||||
| 6.6 Comments on product seen: | |||||||||||||||||||||||||
|
6.7 Product Cleaning |
|||||||||||||||||||||||||
|
* Spot cleaning facilities available? If yes, is the area well ventilated? |
|||||||||||||||||||||||||
|
Yes |
No |
||||||||||||||||||||||||
|
* What methods are used? What type of equipment? |
|||||||||||||||||||||||||
|
* Is protective wear provided? Mask, Gloves, etc? |
|||||||||||||||||||||||||
|
6.8 Pressing / Finishing |
|||||||||||||||||||||||||
|
6.9. Type of equipment (denote quantity if available) |
|||||||||||||||||||||||||
|
Domestic Iron |
|
Flat Bed Press With Vacuum |
|
Comments: |
|||||||||||||||||||||
|
Hand Steam Iron |
|
Dolly / Hoffman |
|
||||||||||||||||||||||
|
Hand Steam Iron With Vacuum |
|
Steam Tunnel |
|
||||||||||||||||||||||
|
6.10. How is glazing avoided? |
6.11 Is gold seal standard available? |
||||||||||||||||||||||||